Re: orsovai film

From: vladimirlinardic <vladimirlinardic_at_yahoo.com>
Date: Thu, 27 Mar 2008 14:42:03 -0000

Thanks for answer. I was asking if this film is comparable to
rodemsky. The rodemsky film will slack off on frame and does not have
static or stickiness as you can fold it onto itself and comes undone.
My frames have 1/2 x1/2 strip adjustable to add slack...
vladimir
--- In Indoor_Construction_at_yahoogroups.com, <RLBailey@...> wrote:
>
> Vladimir
>
> I have found in the past that if the film doesn't slacken off after
3 months, it probably never will. Try attaching thin strips of tape
along 2 adjacent sides of the film and cut away from the main frame
to allow the film to slacken. Leave for up to 2 months to adjust,
then cover with the film not too tight. I have found that the film
tightens on the wing/tail after covering if it had been tight on the
frame, indicating that it shrinks when the tension is removed.
Result; a very bad looking prop!
>
> Any other views anyone?
>
> Bob----- Original Message -----
> From: vladimirlinardic
> To: Indoor_Construction_at_yahoogroups.com
> Sent: Tuesday, March 25, 2008 2:34 PM
> Subject: [Indoor_Construction] orsovai film
>
>
> Does anyone here have experience with Orsovai film from hungary?
I pour
> some seems strong and very glittering in colour. How long to age
and
> does it go slack on frame? How dry is it, high or low static?
>
> vladimir
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
Received on Thu Mar 27 2008 - 07:44:07 CET