Only Abram seems to know what the actual weight rule is. Its in the latest issue of INAV, but I cant recall what he'd written.
Iaco
To: Indoor_Construction_at_yahoogroups.com
From: john_kagan_at_hotmail.com
Date: Tue, 12 Apr 2011 04:21:22 +0000
Subject: [Indoor_Construction] Re: New event ay USIC
So now the Wally Miller one-design min weight it 1.7 grams?
Per
http://www.modelaircraft.org/files/2011IndoorFFNFFSEventsRules.pdf:
Wally Miller One Design Early EZ-B Event
1.Model must be built to specifications, to include wood sizes, as shown on plans published in Indoor News and Views Copy #125. For plans contact Abram VanDover
2.Covering must be mylar.
3.Rubber motor to be TAN II
4.Weight will be 1.7 grams
5.Event Director has final word.
--- In Indoor_Construction_at_yahoogroups.com, Tom Iacobellis <tiacobellis_at_...> wrote:
>
>
>
>
>
>
>
>
> After speaking with Abram, I wanted to pass along a few points that were either unclear and/or not covered.
>
> First the issue of covering material. Microfilm is not allowed, any Mylar is.
>
> Second there is a minimum weight of 1.970 grams.
>
> The prop blades must be a consistant .032 in. thick. Ofcourse, you can warp the blades with your favorite method.
>
> All dimensions and measurments must be adheared to, including the single thrust bearing.
>
> Imagine a mass launch of these at USIC, Wacky
>
> Tom
>
>
>
>
>
>
> To: Indoor_Construction_at_yahoogroups.com
> From: ykleetx_at_...
> Date: Wed, 22 Sep 2010 03:33:25 +0000
> Subject: [Indoor_Construction] Re: New event ay USIC
>
>
>
>
> Hey, when did you guys receive your INAV issue? I haven't received mine.
>
> --- In Indoor_Construction_at_yahoogroups.com, "Mark F1diddler" <f1diddler_at_> wrote:
> >
> >
> > To those who have received the latest INAV, what do you think of Abram Van Dover's event proposal? He's instituting a one-design original 1960 Wally Miller "Easy-B" contest. $100 first place prize! (And cash down to 3rd place.) He stresses the only design exception is covering--no microfilm allowed, as the 1960 Easy-B was mic covered.
> >
> > I wonder about the single hole prop hanger--wonder if there's a workaround for that.
> > MB
> >
>
Received on Tue Apr 12 2011 - 08:35:46 CEST