Brilliant!
http://www.micromark.com/JEWELERS-DRAW-PLATE,6942.html
Tony
To: Indoor_Construction_at_yahoogroups.com
From: carl.bakay_at_yahoo.com
Date: Tue, 6 Apr 2010 15:30:10 -0700
Subject: Re: [Indoor_Construction] wing post sizer
Micromark sells the same thing, to reduce dowels to less than 1/16"
Carl Bakay
From: Neil Dennis <wombatt_at_gmail.com>
To: Indoor_Construction_at_yahoogroups.com
Sent: Tue, April 6, 2010 7:38:30 AM
Subject: [Indoor_Construction] wing post sizer
I show the students how to make a "swedge ?" sizer. We drill a series
of holes from about 3/32" to 1/16" in a small steel plate, that leaves a
burr on one side. Then we just push the posts thru the holes brom the
burr side going down is size until the 1/16" (last). Easy for beginners
to control and they don't end up with odd sizes.
wombat
Received on Tue Apr 06 2010 - 16:54:45 CEST