Re: wing post sizer

From: Carl Bakay <carl.bakay_at_yahoo.com>
Date: Tue, 6 Apr 2010 15:30:10 -0700 (PDT)

Micromark sells the same thing, to reduce dowels to less than 1/16"

Carl Bakay




________________________________
From: Neil Dennis <wombatt_at_gmail.com>
To: Indoor_Construction_at_yahoogroups.com
Sent: Tue, April 6, 2010 7:38:30 AM
Subject: [Indoor_Construction] wing post sizer

   
I show the students how to make a "swedge ?" sizer. We drill a series
of holes from about 3/32" to 1/16" in a small steel plate, that leaves a
burr on one side. Then we just push the posts thru the holes brom the
burr side going down is size until the 1/16" (last). Easy for beginners
to control and they don't end up with odd sizes.

wombat

 


      
Received on Tue Apr 06 2010 - 15:30:22 CEST