Re: Re: 6" props for P-18

From: William Gowen <wdgowen_at_gmail.com>
Date: Mon, 13 Mar 2017 15:00:18 -0400

It's very possible.

On Mar 13, 2017 2:59 PM, "Warthodson_at_aol.com [Indoor_Construction]" <
Indoor_Construction_at_yahoogroups.com> wrote:

>
>
> Bill, I always suspected you were an alien!
> Just to be clear, I mean another planet, not another country.
> Gary
>
>
> -----Original Message-----
> From: William Gowen wdgowen_at_gmail.com [Indoor_Construction] <
> Indoor_Construction_at_yahoogroups.com>
> To: Indoor_Construction <Indoor_Construction_at_yahoogroups.com>
> Sent: Mon, Mar 13, 2017 1:38 pm
> Subject: Re: [Indoor_Construction] Re: 6" props for P-18
>
>
> I wasn't trying to be critical. I think anyone who wants to fly the event
> should. I choose not to because I said in the beginning that I wouldn't. My
> highly advanced knowledge of indoor flying would make it unfair for mere
> humans to try to compete.
>
> On Mar 13, 2017 1:23 PM, "Rey Mazzocco aprivpilot_at_aol.com
> [Indoor_Construction]" <Indoor_Construction_at_yahoogroups.com> wrote:
>
>
> I'm not sure how you define an expert, but I'm definitely not one! But I
> digress....
>
> Our mutual friend Randall K wanted to get into indoor rubber and had many
> excellent questions. My daughter also wants to get started. In doing some
> research for them it piqued my interest in building one. Good for banging
> around the local gym and not worrying about breaking anything. Also, helps
> me help them. AND, all the propeller data was published for ALL to see on
> Hippocket. With the rules the way they are, I don't see where any
> particular design will be better than any other. Just good clean fun!
>
> Rey
>
> -----Original Message-----
> From: 'William D. Gowen' wdgowen_at_gmail.com [Indoor_Construction] <
> Indoor_Construction_at_yahoogroups.com>
> To: Indoor_Construction <Indoor_Construction_at_yahoogroups.com>
> Sent: Mon, Mar 13, 2017 12:09 pm
> Subject: Re: [Indoor_Construction] Re: 6" props for P-18
>
>
> I wonder what the proposers of the P-18 event think about all the expert
> interest? Probably not happy about it IMHO.
>
> On 3/13/2017 10:11 AM, Rey Mazzocco aprivpilot_at_aol.com
> [Indoor_Construction] wrote:
>
>
> Ray,
>
> I had posted this info on Hippocket a few days ago. Pitch measured on A to
> Z gauge at 2" radius. Pictures are on that site:
>
> Williams Bros. 5.5" 2.57g 5.9"P
> Peck 6" 1.81g 3.8"P
> Kaysun 6" 2.72g 6.1"P
> Tern Aero 6" 2.95g 6.1"P
> OS-150 5.75" 1.84g 5.3"P
> Pitsco 6" 2.75g 5.1"P Measured by Bill on Hippocket
> Unknown(red) 5.5" 1.60g 6.7"P Blade shape like old Sleek Streak
> Unknown(red) 5.375" 1.79g 9.1"P Blade shape like old Sleek Streak
>
> I actually have multiples of most of these except the last one. Some
> aren't useable due to unequal pitch between the blades.
>
> The last prop has a counterbore molded into the front and a "1" molded on
> the back of one of the blades. Wish I knew where this came from. Anyone
> have any ideas???
>
> Rey
>
>
> -----Original Message-----
> From: rbharlan_at_comcast.net [Indoor_Construction]
> <Indoor_Construction_at_yahoogroups.com>
> <Indoor_Construction_at_yahoogroups.com>
> To: Indoor_Construction <Indoor_Construction_at_yahoogroups.com>
> <Indoor_Construction_at_yahoogroups.com>
> Sent: Mon, Mar 13, 2017 8:40 am
> Subject: Re: [Indoor_Construction] Re: 6" props for P-18
>
>
> I'm glad to here some responses to my post. How about you owners of
> *Pitsco* and *other props* weighing some (without shafts or hangers) and
> posting the results. That will be useful for preliminary evaluation of
> various props.
>
> Ray
>
>
>
>
Received on Mon Mar 13 2017 - 19:08:11 CET