Re: Chain Gang Winder Malfunction

From: Jake Palmer <82.jake_at_gmail.com>
Date: Tue, 3 Nov 2015 08:28:15 -0800

I don't have much experience with my Chain Gang yet, but in all of my
testing the counter appeared to work perfect.

On Tue, Nov 3, 2015 at 8:21 AM, 'Akihiro Danjo' adanjo-373_at_mx1.ttcn.ne.jp
[Indoor_Construction] <Indoor_Construction_at_yahoogroups.com> wrote:

>
>
> >My 1:20 winder has been displaying a higher count than I've actually been
> cranking in. I isolated the problem to a defective GRI reed switch, and
> fixed it by replacing the GRI switch with a Coto. If any of you out there
> are experiencing a similar problem, I want to fix it (the GRI switch is a
> brown plastic cylinder, 1/4 D x 3/4 L).
>
> I inspected my winder. Mine is the very first versin (or prototype) of
> Chain Gang Winder. The switch is a red tube and about 4.5mmD x 30mmL.
> I coupled two winders together, ChainGang and a Japanese one, and wound
> each other. The result was perfect, no difference at all. Of course, I have
> never felt the problem.
>
> Aki
>
>
>
Received on Tue Nov 03 2015 - 08:28:17 CET