Joshua Finn's advice sounds like what we did for the old Federation ROG
props for the USIC. I bushed with Teflon tubing. A check of the old box
showed a grey Peck, and what I think was a Tern Aero and an Igra.
Scraping removed all the logos.
Fred Rash
On 5/21/2014 1:32 PM, joshuawfinn_at_gmail.com [Indoor_Construction] wrote:
> I've tried several props for the PF. None has given the performance I
> could drag out of a Peck 6". By the way, do not leave the hub out of
> your lightening pursuit. I grind the hubs way down and bush them with
> hypodermic tubing. Prop shaft should be .020 if you're planning to use
> .09-.100 rubber, .015 if smaller. I have also used hypo tube for the
> bearing, and that does save a little weight.
Received on Wed May 21 2014 - 13:28:08 CEST
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:48 CET