Re: Sanding round prop spars

From: <mkirda_at_sbcglobal.net>
Date: Thu, 31 Oct 2013 15:16:36 -0000

Hi Gary.

When I get around to making them, I'll make a variety of grooves.
12" is what I planned on. I will likely make up half a dozen or so out of whatever hardwood I have onhand. Likely maple or oak.

I will let you know.

Regards.
Mike Kirda

--- In Indoor_Construction_at_yahoogroups.com, Warthodson@... wrote:
>
>
> Hi Mike,
> If you are going to make some of the sanding jigs, I would be interested in one. Tom Sova's was .085" wide groove tapering to .025" wide. That would be as good as any starting place for me. I would prefer one approx. 12" long.
> Please let me know if you plan to make some, how much I would owe you & what forms of payment you accept. I can send via PayPal if that works for you.
> Gary Hodson
>
>
> -----Original Message-----
> From: mkirda <mkirda_at_...>
> To: Indoor_Construction <Indoor_Construction_at_yahoogroups.com>
> Sent: Tue, Oct 22, 2013 7:36 am
> Subject: Re: [Indoor_Construction] RE: Sanding round prop spars
>
>
>
>
>
>
> Tom had asked me earlier this summer to make a few for him and I have been so busy I haven't been able to get to it.
>
> These are pretty trivial to make though. V groove bit and router table is all you need. If anyone needs one, let me know. I can make a bunch of these pretty quickly.
>
> Regards.
> Mike Kirda
>
Received on Thu Oct 31 2013 - 08:16:39 CET