Re: The Chain Gang Winder
Art,
I don't use the toggle. I wind to max torque then lock and dock the winder. Record torque and winds, then press zero button on counter and back off to target torque. Record those numbers then hook up and fly.
After landing I put motor back on winder and torque meter, push zero button and count and record turns remaining and the flight time. Bill Gowen's spreadsheet does the calculations for RPM and turns used.
Only have flown once, so may not be the ideal way.
Rey
-----Original Message-----
From: art <upwind120_at_gmail.com>
To: Indoor_Construction <Indoor_Construction_at_yahoogroups.com>
Sent: Thu, Jul 25, 2013 10:41 pm
Subject: [Indoor_Construction] The Chain Gang Winder
Do any of the Chain Gang ever use the subtract count feature? The new counters are more compact and present soldering challenges that I didn't have before. It'd make it a lot easier to fabricate if I could leave that toggle switch off.
Thanks,
Art.
Received on Fri Jul 26 2013 - 09:58:19 CEST
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:47 CET