Re: Label for rubber envelope [1 Attachment]

From: Segundo Zarate <segundo.zarate_at_gmail.com>
Date: Thu, 1 Jul 2010 09:43:38 -0700

*Neat, John! What a great aeromodelling idea. Thank you.*

On Thu, Jul 1, 2010 at 8:38 AM, John Barker <john.barker783_at_ntlworld.com>wrote:

>
> [Attachment(s) <#1298ea9747e5a6b1_TopText> from John Barker included
> below]
>
>
> If you can't find envelopes then act like an aeromodeller and make them! I
> made a drawing as attached then printed it on A4 paper, which gives me four
> envelopes. A few more sheets through the printer and you are set up for the
> season. The patterns are cut out along the green lines The two small
> flaps, at the side and the bottom, are folded over and glue is applied to
> them. The back is folded over and attached to the glued flaps. Hey Presto,
> one envelope ready printed to your requirements is finished.
>
> The cutting out is a bit of a pain but no great accuracy is required - the
> flap size is not critical, the accuracy comes in the folding. I can assure
> you that making the envelopes is far quicker than stripping the rubber to
> fill them.
>
> John Barker - England
>
>
>
Received on Thu Jul 01 2010 - 09:43:43 CEST