RE: Label for rubber envelope [1 Attachment]

From: Ken Achée <ken_at_achee.com>
Date: Mon, 28 Jun 2010 22:43:47 -0500

What quantity did you have to purchase? I found some online but the minimum
is 500. A little more than I expect to use for a while.

 

From: Indoor_Construction_at_yahoogroups.com
[mailto:Indoor_Construction_at_yahoogroups.com] On Behalf Of Bill Gowen
Sent: Tuesday, April 20, 2010 5:26 PM
To: Indoor_Construction_at_yahoogroups.com
Subject: [Indoor_Construction] Label for rubber envelope [1 Attachment]

 

  

[Attachment(s) from Bill Gowen included below]

I use the 2 1/2" x 4 1/4" manila coin envelopes for my motors. Over time
I've collected a bunch of motors and they have all different kinds of notes
scribbled on them. I decided it would be nice to have some sort of
standardized notation and that either preprinted envelopes or labels for
this information would be great.

 

I found a container of Avery #8163 2" x 4" shipping labels that looked just
right for the job. The problem was that using the standard label formatting
in Open Office didn't permit a landscape layout for the sheet that would let
me print the labels in a vertical orientation to fit the envelopes. After
much fiddling I got a table made that would let me do this. The attached
picture is the result.

 

I'll put the master document in the files section in case anyone else wants
to play with it.
Received on Mon Jun 28 2010 - 20:43:57 CEST