Leroy, you mentioned this "I still have copies of all those units if anybody needs them."By those units, you mean??
To: Indoor_Construction_at_yahoogroups.com
From: lcordes_at_juno.com
Date: Wed, 7 Apr 2010 10:01:57 -0500
Subject: Re: [Indoor_Construction] Post Maker
WOW, John, how simple and functional.
I had fits getting wing posts rounded until Bill Gowen came
through with photos and a video of a beautiful metal device he made
for the job. I managed to make a copy out of hardwood and with
my trusty variable Dremel tool now round wing posts with little
difficulty. I still have copies of all those units if anybody needs
them. The video is in the files section under the name Post
Maker.wmv
LeRoy Cordes
Chicago, Illinois
AMA 16974
In God We Trust
On Mon, 5 Apr 2010 15:54:09 +0100 "John Barker" <john.barker783_at_ntlworld.com>
writes:
Quite right Tony, a wing post rounder
offer. Skilled builders just use a vee of sandpaper in their fingers but
the less dexterous of us, such as me, need all the help I can get. The device
is not foolproof, the important thing is not to let the post get too deep into
the thin end of the vee where it will jamb and break. I avoid this by
holding the thing as in the photograph with a finger either side governing the
depth at which the post sits in the vee. I also take off the corners of
the square post with a sharp blade before starting on the sanding. When
sanding I combine a rotary twiddle with the fingers and a slow in and out
longitudinal movement.
John Barker - England
LeRoy Cordes
Chicago, Illinois
AMA
16974
In God We Trust
____________________________________________________________
Penny Stock Jumping 2000%
Sign up to the #1 voted penny stock newsletter for free today!
AwesomePennyStocks.com
Received on Thu Apr 08 2010 - 14:08:03 CEST
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:46 CET