I made my torque meter using .015 diameter wire, it was what the hobby
shop had. In order to be able to use it for EZB I used a long torque
wire about 2 feet which gives me. This also gave me more room for
error with lengths of wire.
Marty Sasaki
On Wed, Dec 31, 2008 at 11:41 AM, Mark <f1diddler_at_yahoo.com> wrote:
> d
>>
>> - I presume that would work with MiniStick much better than the 1.2
> in-oz I currently use.>>
>
> Leroy,
> Correct, for ministick or light ezb sizes, consider a wire
> length/diameter that goes to about .2 in-oz. in one complete dial
> face revolution. That what I use, and marked in .01 in-oz increments,
> with plenty space between the .01 marks. I'll try to find my wire
> diameter for you later, is but packed away due to move. 6-9" long is a
> good wire length.
> Mark F1diddler
>
>
--
Marty Sasaki
Arlington, MA, USA
http://www.martys-simple-things.com/
marty.sasaki_at_gmail.com
Received on Wed Dec 31 2008 - 19:14:17 CET