Re: Draw Plate Dies from Small Parts was Re: Re: Wing Post Socket Mounting in a Rolled Motor Stick

From: <vhacker_at_pol.net>
Date: Fri, 20 Jul 2007 22:23:50 -0400 (EDT)

Mark I agree that all sanded wood should be soaked as well as that wood
that has been sawed then mike it weigh it and calulate its density.
wood that weighs one gram per cubic inch is with in 4.8% of four pound
balsa Hach

> All sanded wood should be soaked in water and dried to expand crushed
> cells to regain original strength strength.
>
> Mark
>
>
> ----- Original Message -----
> From: Fred or Judy Rash<mailto:frash_at_chartertn.net>
> To:
> Indoor_Construction_at_yahoogroups.com<mailto:Indoor_Construction_at_yahoogroups.com>
> Sent: Friday, July 20, 2007 4:30 PM
> Subject: Draw Plate Dies from Small Parts was Re:
> [Indoor_Construction] Re: Wing Post Socket Mounting in a Rolled Motor
> Stick
>
>
> Draw plate dies work for bamboo, basswood, or balsa and are laborious
> but therapeutic. Probably compresses the balsa somewhat also.
>
> Fred Rash
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
Received on Fri Jul 20 2007 - 19:23:53 CEST