Re: Wright Stuff rules for 2007

From: Bill Gowen <b.gowen_at_earthlink.net>
Date: Wed, 30 Aug 2006 17:06:04 -0400

It's an EZB! (at least real close)

  ----- Original Message -----
  From: Robert Clemens
  To: Indoor_Construction_at_yahoogroups.com
  Sent: Wednesday, August 30, 2006 2:32 PM
  Subject: [Indoor_Construction] Wright Stuff rules for 2007


  A retired teacher friend of mine, who also happens to be the Rochester
  regional Science Olympiad coordinator, has given me copies of the high
  school and middle school model aircraft event rules for 2007. Perhaps some
  of you have seen them too. Here are some highlights.

  High School Wright Stuff

  - Monoplanes only.
  - 50 cm wingspan limit.
  - 7 cm chord limit.
  - 30 cm max stabilizer span.
  - 4.5 cm max stabilizer chord.
  - Prop diameter max of 18.5 cm.
  - Mass, less rubber, no less than 7 grams
  - Mass of rubber motor no more than 2 grams.
  - State competition flight time bonus of 10% for a pusher propeller model.
  Prop must be located behind wing.
  - National competition flight time bonus of 10% for a canard pusher.
  ("Stabilizer is located in front of the wing and the propeller is located
  behind the wing.")

  Balloon launch glider will be the aeromodeling event for middle schools.

  - Total mass of glider not to be less than 2 grams "throughout the flight."
  - Max span of 40 cm.
  - Max chord of 10 cm.
  - Max stabilizer span of 28 cm.

  Gentlemen, man your drafting boards!

  Bob Clemens




   

[Non-text portions of this message have been removed]
Received on Wed Aug 30 2006 - 14:19:57 CEST