Re: A-6 motor stick

From: Bill Gowen <wdgowen_at_earthlink.net>
Date: Mon, 13 Mar 2006 21:57:19 -0500

Thanks Gary!
  ----- Original Message -----
  From: Warthodson_at_aol.com
  To: Indoor_Construction_at_yahoogroups.com
  Sent: Monday, March 13, 2006 9:28 PM
  Subject: Re: [Indoor_Construction] A-6 motor stick


  In a message dated 3/13/2006 9:20:21 AM Central Standard Time,
  wdgowen_at_earthlink.net writes:
  Can someone give me some starting point dimensions and weights for an
  A-6 motor stick?
  I start with a piece of 7.5# wood, .090" wide X .180" high X 6.25" long. It
  will weigh about .21 grams. I taper the stick slightly from the center to both
  ends. After the bearing, rear hook & tissue tubes are added it weights approx.
  .23 grams. This is a heavy, stiff motor stick for high ceiling sites.
  Gary Hodson


  [Non-text portions of this message have been removed]



  SPONSORED LINKS Radio controlled Power source Aircraft
        Flying Newcomers Outside


------------------------------------------------------------------------------
  YAHOO! GROUPS LINKS

    a.. Visit your group "Indoor_Construction" on the web.
      
    b.. To unsubscribe from this group, send an email to:
     Indoor_Construction-unsubscribe_at_yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]
Received on Mon Mar 13 2006 - 18:57:21 CET