And this is somehow better than letting the flier do it himself?
On Mon, Mar 13, 2017 at 9:59 PM, Don DeLoach ddeloach_at_comcast.net
[Indoor_Construction] <Indoor_Construction_at_yahoogroups.com> wrote:
>
>
> Not sure of your point. Gizmo Geezer props are commercially available and
> therefore legal for P-30. If someone wants to modify a 6" prop to a certain
> standard and make it commercially available then it'd be legal for P-18.
>
> DD
>
> On Mar 13, 2017, at 7:48 PM, Rey Mazzocco aprivpilot_at_aol.com
> [Indoor_Construction] <Indoor_Construction_at_yahoogroups.com> wrote:
>
>
>
> Don, I seem to remember a similar issue with P-30 props initially.
>
> See: http://www.gizmogeezer.com/p30.htm
>
> Rey
>
> -----Original Message-----
> From: Don DeLoach ddeloach_at_comcast.net [Indoor_Construction] <
> Indoor_Construction_at_yahoogroups.com>
> To: Indoor_Construction <Indoor_Construction_at_yahoogroups.com>
> Sent: Mon, Mar 13, 2017 4:44 pm
> Subject: Re: [Indoor_Construction] Re: 6" props for P-18
>
>
> Unmodified props have worked rather well for ~40 years in P-30.
>
> "The perfect is the enemy of the good."
>
> DD
>
> On Mar 13, 2017, at 12:50 PM, William Gowen wdgowen_at_gmail.com
> [Indoor_Construction] <Indoor_Construction_at_yahoogroups.com> wrote:
>
>
> To get a little more serious I think the unmodified prop rule is leading
> to a ridiculous situation. People who are discussing props here are talking
> about going thru a bunch of props from different makers to find ones that
> are usable. The beginning flier who builds a P-18 from a kit is not going
> to know whether he has a prop with wildly unequally pitched blades until
> the model tries to shake itself apart in the air. And then the rules
> prevent him/her or a helpful more experienced flier from making a simple
> adjustment that will fix the problem.
>
> I think at a minimum a person should be able to adjust the pitch of the
> prop.
>
> On Mon, Mar 13, 2017 at 1:23 PM, Rey Mazzocco aprivpilot_at_aol.com
> [Indoor_Construction] <Indoor_Construction_at_yahoogroups.com> wrote:
>
>
> I'm not sure how you define an expert, but I'm definitely not one! But I
> digress....
>
> Our mutual friend Randall K wanted to get into indoor rubber and had many
> excellent questions. My daughter also wants to get started. In doing some
> research for them it piqued my interest in building one. Good for banging
> around the local gym and not worrying about breaking anything. Also, helps
> me help them. AND, all the propeller data was published for ALL to see on
> Hippocket. With the rules the way they are, I don't see where any
> particular design will be better than any other. Just good clean fun!
>
> Rey
>
> -----Original Message-----
> From: 'William D. Gowen' wdgowen_at_gmail.com [Indoor_Construction] <
> Indoor_Construction_at_yahoogroups.com>
> To: Indoor_Construction <Indoor_Construction_at_yahoogroups.com>
> Sent: Mon, Mar 13, 2017 12:09 pm
> Subject: Re: [Indoor_Construction] Re: 6" props for P-18
>
>
> I wonder what the proposers of the P-18 event think about all the expert
> interest? Probably not happy about it IMHO.
>
> On 3/13/2017 10:11 AM, Rey Mazzocco aprivpilot_at_aol.com
> [Indoor_Construction] wrote:
>
>
> Ray,
>
> I had posted this info on Hippocket a few days ago. Pitch measured on A to
> Z gauge at 2" radius. Pictures are on that site:
>
> Williams Bros. 5.5" 2.57g 5.9"P
> Peck 6" 1.81g 3.8"P
> Kaysun 6" 2.72g 6.1"P
> Tern Aero 6" 2.95g 6.1"P
> OS-150 5.75" 1.84g 5.3"P
> Pitsco 6" 2.75g 5.1"P Measured by Bill on Hippocket
> Unknown(red) 5.5" 1.60g 6.7"P Blade shape like old Sleek Streak
> Unknown(red) 5.375" 1.79g 9.1"P Blade shape like old Sleek Streak
>
> I actually have multiples of most of these except the last one. Some
> aren't useable due to unequal pitch between the blades.
>
> The last prop has a counterbore molded into the front and a "1" molded on
> the back of one of the blades. Wish I knew where this came from. Anyone
> have any ideas???
>
> Rey
>
>
> -----Original Message-----
> From: rbharlan_at_comcast.net [Indoor_Construction]
> <Indoor_Construction_at_yahoogroups.com>
> <Indoor_Construction_at_yahoogroups.com>
> To: Indoor_Construction <Indoor_Construction_at_yahoogroups.com>
> <Indoor_Construction_at_yahoogroups.com>
> Sent: Mon, Mar 13, 2017 8:40 am
> Subject: Re: [Indoor_Construction] Re: 6" props for P-18
>
>
> I'm glad to here some responses to my post. How about you owners of
> *Pitsco* and *other props* weighing some (without shafts or hangers) and
> posting the results. That will be useful for preliminary evaluation of
> various props.
>
> Ray
>
>
>
>
>
Received on Tue Mar 14 2017 - 04:13:38 CET