Vlad,
3M spray thinned with TCE (trichloroethylene) is my preferred method. Use a fine brush to apply the thinned 3M every .25 to .5 inches along the spars and ribs. (No need to coat the entire spar or rib) When dry lay your outline on a frame covered with film. Use TCE to paint around the outline and ribs the same way you would use water or saliva when you covered with microfilm.
Tom
Sent from my iPad
> On Sep 3, 2015, at 7:48 PM, linardic_at_yahoo.com [Indoor_Construction] <Indoor_Construction_at_yahoogroups.com> wrote:
>
> Dear All
> For many years i wanted to get away from covering spraying messy 3M spray. Those that are using rubber cement or thinning 3M adhesive can you share your wisdom about thinning, brands to use, how much to thin and application and covering methods.
>
> ------------------------------------
> Posted by: linardic_at_yahoo.com
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
Received on Thu Sep 03 2015 - 17:44:18 CEST
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:48 CET