Finally, now I've got it - I will have to try that as I. also, have
burned up a newly covered surface in the past.
LeRoy Cordes YOLO
Chicago, Illinois
AMA 16974 - WAA Pilot #337
In God We Trust
On 14 Aug 2014 14:32:04 -0700 "upwind120_at_gmail.com [Indoor_Construction]"
<Indoor_Construction_at_yahoogroups.com> writes:
[Attachment(s) from upwind120_at_gmail.com [Indoor_Construction] included
below]
Mike, it was the cautery that started the fire. Now, with the blank in
place, it's running on 1.2 volts and doesn't get hot enough to do
anything except cut film. The element doesn't glow at all. I figured that
if I needed more heat I could switch from the NiMH to an alkaline, but it
seems okay the way it is.
OlBill uses a 15 w iron, which works better than the cautery on 2 cells
but I can't control it well holding it 4 inches from the tip. The cautery
is an unnecessarily big bulky thing, but my trigger finger is less than 2
inches back from the tip and I can control it, especially at its new
lower heat.
Anyway, the BV-141 kit just got here and I have to concentrate on that
for awhile.
a.
LeRoy Cordes YOLO
Chicago, Illinois
AMA 16974 - WAA Pilot #337
In God We Trust
____________________________________________________________
Buffett's "Real Threat"…
See the technology W. Buffett calls the "Real Threat" to his fortune.
http://thirdpartyoffers.juno.com/TGL3141/53ef5b108bb085b1019b9st01vuc
- application/x-ygp-stripped attachment: stored
- application/x-ygp-stripped attachment: stored
- application/x-ygp-stripped attachment: stored
Received on Sat Aug 16 2014 - 06:23:25 CEST