Aki,
I have the scale pictured and it came with instructions for calibration. Here goes:
Turn the scale on and wait for the display to zero (the weighing pan is empty). Press and hold the "mode" (may be called "units") button (the upper-left button) and wait until the display says "CAL". Release the mode button. Press and release the mode button again. The display will flash "CAL" on and off. Then the display will display the calibration weight to use (mine says "10.000"). Place that calibration weight on the weighing platform. The number will flash on and off while the calibration takes place. If the calibration is successful, the scale will show "PASS" for a few seconds and then the value of the calibration weight will show. The scale is now calibrated. I do not know what the scale will display if the calibration fails because that has not happened yet to me.
One other thing to remember is that these scales must be level to be accurate.
Leo
Received on Tue Feb 18 2014 - 21:36:42 CET
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:48 CET