Re: Re: Exact Builder of Model Rule

From: Phedon Tsiknopoulos <phedon21t_at_yahoo.com>
Date: Sat, 8 Feb 2014 14:20:22 -0800

I shall use .250" ID and 12" long for mine.
I am in the process of making the forms and the molds.
Stay tuned, a breakthrough is imminent. Ciao, Phedon.

Sent from my iPhone

On Feb 8, 2014, at 12:56 PM, Kevin Lamers <kevin.lamers_at_gmail.com> wrote:

> The weight of 225 mg is for a carbon tube with a length of 10". 9" I can also make at 200 mg.
> My ID is 4.8mm = 0.2". They are probably stiff/strong enough to use without bracing.
>
> OK keep your process secret, but please share the material you used ;-)
>
> Kevin
>
>
> 2014-02-08 21:41 GMT+01:00 Phedon Tsiknopoulos <phedon21t_at_yahoo.com>:
>>
>> Carbon is unsuitable for motor tubes.
>> My tubes have no carbon. Prepreg is too heavy.
>> My process will remain a secret.
>> What length are your tubes as you use them for official flights?
>> I shall be sending Mike Kirda a 9" one in order to test it
>> Mine are 1/4" I.D.
>>
>>
>>
>>
>> Sent from my iPhone
>>
>> On Feb 8, 2014, at 11:56 AM, Kevin Lamers <kevin.lamers_at_gmail.com> wrote:
>>
>>>
>>> Best wishes,
>>> Kevin
>
>
Received on Sat Feb 08 2014 - 14:20:37 CET