Mike,
I use a 3/4" wood frame with 1/8 aircraft plywood. I use 0.93"Lexan for the
windows as well.
The dimensions are 22" x 9" x 11"
I would recommend avoiding Gator Board it comparatively fragile. I built
one Gator Board box but found it too weak to survive being checked on the
off chance that I had to.
Regards,
Nick
On Tue, Dec 3, 2013 at 12:42 PM, Jake Palmer <82.jake_at_gmail.com> wrote:
>
>
> Most airlines restrict carry on luggage to 22x14x9. I would recommend a
> box a little smaller at around 22x12x9. I personally used 3/16" plywood
> and lexan to build my F1D box.
>
>
> On Tue, Dec 3, 2013 at 9:36 AM, mkirda_at_sbcglobal.net <mkirda_at_sbcglobal.net
> > wrote:
>
>>
>>
>> I'm looking for external dims used by folks like Kagan or Sanborn.
>> I assume that these were built with 3/8" Gatorboard.
>>
>> I found a good local source finally for Gatorboard.
>>
>> Regards.
>> Mike Kirda
>>
>>
>
>
Received on Tue Dec 03 2013 - 10:29:04 CET
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:48 CET