RE: Peanut weight question

From: N. A. Monllor <nmonllor_at_tampabay.rr.com>
Date: Fri, 11 Jan 2013 22:15:08 -0500

Thanks Gary,

To be honest, I’m leaning more and more towards balsa wheels. I think that’s the ticket!!!

 

Thanks,

Ren

 

From: Indoor_Construction_at_yahoogroups.com [mailto:Indoor_Construction_at_yahoogroups.com] On Behalf Of Warthodson_at_aol.com
Sent: Friday, January 11, 2013 9:22 PM
To: Indoor_Construction_at_yahoogroups.com
Subject: Re: [Indoor_Construction] Peanut weight question

 

  

Ren,

From the photo of the Sommers it looks like it will be a very good model with potential to be a good flyer,too. The weight of the fuse, wings etc seems "competitive", but the weight of each wheel seems high, very high. To keep it light, consider making the wheels out of something else. Balsa, Styrofoam for example.

Gary Hodson

 

 

Subject: [Indoor_Construction] Peanut weight question

  

Hello guys,
I just uploaded a photo of my progress on my Peanut Scale project. It's a Sommers Monoplane and the fuse will be pretty much all, with the bottom of the fuse, will be uncovered to show the wiring and to keep it light.
With what is in the photo I'm at 2.75 grams.
I just finished making an aluminum wheel and it came in at 1.95 grams with the rubber tire mounted onto the rim.
Once I make the other wheel and mount the tire onto it I'll be at 6.650 grams and I still have to make the landing gear rigging and the cable rigging that stands in front of the pilot. I'm thinking of using .015 MW for the rigging (.57 gr + 6.650 = 7.22gr.).
I'm covering the flying surfaces (wing, stab and rudder)with condenser paper.
Let's say I'll be at 7.5 - 8 gr AUW. Does that sound like it'll fly or am I too heavy and need to take something off?

It's my first attempt at scratch building a peanut scale model and I sure would like some input on this before I keep going down the wrong track, if that's what I'm doing.

thank you,

Ren
Received on Fri Jan 11 2013 - 19:15:11 CET