Ceiling Bumps was Re: Word.

From: <mkirda_at_sbcglobal.net>
Date: Sun, 23 Dec 2012 19:20:10 -0000

Might some 003 boron on the top/bottom of at least a couple of prop ribs help here? Or is the prop spar actually rotating under the force?

Just curious...

Regards.
Mike Kirda

--- In Indoor_Construction_at_yahoogroups.com, "joshuawfinn" <joshuawfinn@...> wrote:
> but more of a model's tendency to let its blades tuck to a reversed condition, creating in effect a big air brake which prevents the model from recovering from mild turbulence. At our last contest, Hope's model still had a little climb left when it bumped a wall, pitched to about 10 degrees nose down, and held that straight to the floor as the blades tucked backwards and spun at about 120 rpm, preventing the model from pitching back into climb attitude. This from a model that in higher torque settings had made repeated recoveries off a basketball net during the same flight.
Received on Sun Dec 23 2012 - 11:20:12 CET