Leroy,
That's the idea ... I hope to see lots of people with $$ in their eyes and take the challenge :)
--- In Indoor_Construction_at_yahoogroups.com, LeRoy C Cordes <lcordes@...> wrote:
>
> WOW! Kang, you better get your checkbook ready - I can almost hear the
> "Aces" digging out their prized motor sticks now <Grin>
>
> LeRoy Cordes YOLO
> Chicago, Illinois
> AMA 16974 - WAA Pilot #337
> In God We Trust
>
> On Fri, 14 Dec 2012 22:05:32 -0000 "Yuan Kang Lee" <ykleetx_at_...>
> writes:
> >
> > A Braced EZB Challenge: Glory, Fun, and Fortune
> >
> > Rules:
> >
> > This challenge allows the use of wood bracing to be added to the
> > solid wood motor stick of the EZB. The intent of this proposal is
> > to remove the frustration of the weak motor stick so the EZB flier
> > can focus on other aspects required for advanced EZB flying.
> >
> > 1. For any braced EZB model that passes the 30-minute mark, the
> > flier will be added to the 30-minute EZB Club of "A History of EZB
> > Flights." You will also receive $100 if your model weighs 0.6 g or
> > above and $75 if your model weighs less than 0.6 g. (One prize per
> > person per model weight class.) Note: if you have already made a
> > previous 30-minute EZB flight, you must build and fly a new model to
> > qualify for the challenge.
> >
> > 2. The flier who has the highest time in the 0.6g or more weight
> > class will receive an additional $250 -- his flight time must be
> > 31:00 or more. The flier who has the highest time in the sub 0.6g
> > class will also receive an additional $250 -- his flight time must
> > be 32:30 or more.
> >
> > 3. If your EZB breaks an AMA Open record (Cat I, II, III, IV), you
> > will be added to the Record Club of "A History of EZB Flights." In
> > addition, you will receive $100. (One prize per person, per
> > Category)
> >
> > 4. All flights must be at an AMA-sanctioned (or FAI-sanctioned)
> > contest or record trial. Processing of model by contest director is
> > required. Photos of motor stick bracing must be provided. You must
> > announce your flight attempt to me 7 days prior to your attempt.
> >
> > 5. Models, bracing techniques, fliers, etc. will all be documented
> > in an article to be submitted to Free Flight Quarterly. Your glory
> > will be widely known.
> >
> > 6. The Braced EZB Challenge starts December 15, 2012 and finishes
> > September 30, 2013.
> >
> > All rules are subject to change by me at any time, but it is not
> >
> > Background: The EZB event was originally introduced in 1961 as an
> > entry level event, a "dumbed down" version of the many complex
> > microfilm and paper models flown at that time. It quickly gained
> > popularity because it was easier and quicker to build. At first,
> > the EZB model weighed around 2.0 g, and it was a sturdy model.
> > Competition pressure would quickly bring the weight down. In 1968,
> > Jim Richmond's Kokomo Bomber EZB weighed a svelt 0.74g. Model
> > weights remained in the 0.75 g to 1.2 g range for the next 25 years.
> > In the mid 1990's Larry Coslick brought down the EZB weight to
> > nearly 0.5 g. Throughout the 1990's, the EZB was often the most
> > popular event flown at USIC, with nearly 100 contestants.
> >
> > Today, the EZB is not a popular event. It is one of the least
> > popular events. In order to be competitive at the national level,
> > an EZB must weigh 0.45 g or less. Larry Coslick, Jim Richmond, Max
> > Zaluska, and Yuan Kang Lee have successfully flown 0.3 g EZBs at
> > national contests. Recently, the AMA Cat IV record was set using a
> > 0.24 g EZB.
> >
> > The EZB model becomes more challenging to build and fly when it is
> > around 0.5g and below. Many can't or decide not to build so light.
> > But perhaps a bigger challenge is that the light EZB is often
> > plagued by a motor stick that is not stiff enough and suffers under
> > higher torque launch conditions. Instead of being a positive
> > challenge, the weak motor stick becomes a source of frustration and
> > a barrier to continued effort.
> >
> > By rule, the EZB motor stick must be solid wood, which means bracing
> > is not allowed. This rule makes the EZB motor stick easy to build.
> > But there is a caveat. You can't just use any motor stick you cut
> > up -- you have to go through many candidate sticks before you find
> > one light and strong enough. We have heard of the travails of many
> > EZB fliers who have gone through hundreds of motor sticks before
> > finding one that is good enough.
> >
> > In contrast, an expert event like F1D uses a rolled motor tube for
> > light weight, and the use of boron and bracing for added stiffness.
> > The resulting motor stick is light and incredibly stiff. I have
> > never heard of a F1D builder who has to go through hundreds of
> > rolled tubes to find one that is stiff enough. In fact, almost
> > every rolled tube is sufficiently stiff once it is reinforced with
> > boron and tightened with bracing.
> >
> > This challenge allows the use of wood bracing to be added to the
> > solid wood motor stick of the EZB. The intent is to remove the
> > frustration of the weak motor stick so the EZB flier can focus on
> > other aspects required for advanced EZB flying.
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
>
> LeRoy Cordes YOLO
> Chicago, Illinois
> AMA 16974 - WAA Pilot #337
> In God We Trust
> ____________________________________________________________
> OVERSTOCK iPads: $33.93
> Get New Apple iPads for $33.93! Limit One Per Customer. Get One Now!
> http://thirdpartyoffers.juno.com/TGL3141/50cdfae68110e7ae65f01st01vuc
>
Received on Sun Dec 16 2012 - 09:22:59 CET