Re: How to do it

From: <mkirda_at_sbcglobal.net>
Date: Tue, 11 Dec 2012 21:47:27 -0000

Combination of launching with lower torque than peak and adjusting the high pitch on the VP pitch to climb only very slowly.

I'd try a 17.5" prop with 2.5" chord, maybe even slightly wider. Maybe a 31" pitch block to start with.

Let's say a 0.053" wide TanII motor will safely take .55 in-oz of torque. You might want to start launching with .15, then .20 in-oz. Increase only by about 0.05 in-oz each time. It is best to only change one thing at a time and keep notes.

Make sure your CG is correct.

Hope that helps.

Regards.
Mike Kirda

--- In Indoor_Construction_at_yahoogroups.com, "gvwezel" <gvwezel@...> wrote:
>
> Oke a new question.
>
> How you do you not hit de celling with your prop ?
> Is it the climming part of the flight please tell me
> and a want to fly in halls with celling at 6 and. 4 meter.
> What prop pitch i use and wen a bild more prop with pitch are the best to use than?
>
Received on Tue Dec 11 2012 - 13:47:29 CET