Fwd: Re: Rib slice tool [1 Attachment]

From: <mkirda_at_sbcglobal.net>
Date: Fri, 05 Oct 2012 17:51:32 -0000

It gets stripped out as an attachment, Fred.
You could post under Photos, tools and jigs?

Mike

--- In Indoor_Construction_at_yahoogroups.com, Fred or Judy Rash <frash@...> wrote:
>
> Reposting to again show the alignment post just left of the template.
>
> Fred Rash
>
> -------- Original Message --------
> Subject: Re: [Indoor_Construction] Rib slice tool [1 Attachment]
> Date: Sat, 29 Sep 2012 22:18:08 -0400
> From: Fred or Judy Rash <frash_at_...>
> Reply-To: Indoor_Construction_at_yahoogroups.com
> To: Indoor_Construction_at_yahoogroups.com
>
>
>
> [Attachment(s) <#TopText> from Fred or Judy Rash included below]
>
> I'll try to attach a photo to help, but it works much like his balsa
> stripper.
>
> Fred Rash
>
> On 9/29/2012 2:21 PM, Fred or Judy Rash wrote:
> >
> > Aki-san is correct. The Jim Jones rib slicing tool permits adjusting
> > the distance the rib template moves downward between slicing cuts by
> > moving a triangular (~15 deg triangle) indexing plate to the right.
> > The horizontal movement is 2-4 times the vertical movement of the
> > template. My ability to describe this clearly is not so great.
> >
> > I wish that I had bought another one of these and another two or more
> > torque meters while Jim Jones was still able to make and sell them.
> > Many good tools came from him.
> >
> > Fred Rash
> >
> >
> > Recent Activity:
> >
> > * New Members
> > <http://groups.yahoo.com/group/Indoor_Construction/members;_ylc=X3oDMTJnZTh1dDQ4BF9TAzk3MzU5NzE0BGdycElkAzE2NTk1MTM2BGdycHNwSWQDMTcwNTA2MzUxMgRzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxMzQ4OTQyOTI0?o=6>
> > 2
> >
> > Visit Your Group
> > <http://groups.yahoo.com/group/Indoor_Construction;_ylc=X3oDMTJmdDI1ZzNlBF9TAzk3MzU5NzE0BGdycElkAzE2NTk1MTM2BGdycHNwSWQDMTcwNTA2MzUxMgRzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzEzNDg5NDI5MjQ->
> >
> > Yahoo! Groups
> > <http://groups.yahoo.com/;_ylc=X3oDMTJlazl2amN1BF9TAzk3NDc2NTkwBGdycElkAzE2NTk1MTM2BGdycHNwSWQDMTcwNTA2MzUxMgRzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTM0ODk0MjkyNA-->
> >
> > Switch to: Text-Only
> > <mailto:Indoor_Construction-traditional_at_yahoogroups.com?subject=Change%20Delivery%20Format:%20Traditional>,
> > Daily Digest
> > <mailto:Indoor_Construction-digest_at_yahoogroups.com?subject=Email%20Delivery:%20Digest>
> > • Unsubscribe
> > <mailto:Indoor_Construction-unsubscribe_at_yahoogroups.com?subject=Unsubscribe>
> > • Terms of Use <http://docs.yahoo.com/info/terms/>
> > .
> >
>
Received on Fri Oct 05 2012 - 10:51:33 CEST