Thanks, Kang, for unusually complete and explicit info on your BS-6
lightweight EZB. I'm unlikely to try to build and fly it, but might
build another F1L. Nevertheless, I hope that lots of folks will follow
your example on providing this type and quality of detailed info.
Fred Rash
On 5/4/2012 1:07 PM, Yuan Kang Lee wrote:
>
> Hi, Jos,
>
> The CG is .23" in front of the wing's trailing edge when using a 0.43g
> motor and .20" in front of the TE when using a 0.33g motor.
>
> Regards,
> -Kang
>
> --- In Indoor_Construction_at_yahoogroups.com
> <mailto:Indoor_Construction%40yahoogroups.com>, "jos_melis"
> <jos_melis_at_...> wrote:
> >
> >
> >
> > --- In Indoor_Construction_at_yahoogroups.com
> <mailto:Indoor_Construction%40yahoogroups.com>, "Yuan Kang Lee"
> <ykleetx_at_> wrote:
> > >
> > > I uploaded two files: a 3-view of the model and info on each
> component.
> > >
> > > You can find them in the files section here:
> > >
> > >
> http://groups.yahoo.com/group/Indoor_Construction/files/Indoor%20Plans/BS-6%20EZB/
> > >
> > > --- In Indoor_Construction_at_yahoogroups.com
> <mailto:Indoor_Construction%40yahoogroups.com>, "Bruce Mccrory"
> <brucemccrory_at_> wrote:
> > > >
> > > > Kang,
> > > >
> > > > I saw this post for "your EZB plan." Is the plan filed on the web?
> > > >
> > > > Thanks,
> > > > Bruce
> > > >
> > >
> > Dear Kang,
> >
> > Thank you for the files of the BS-6.
> > Where should I put the C.G. ?
> > Kindest regards,
> > Jos
> >
>
>
Received on Fri May 04 2012 - 10:20:46 CEST