Bill, what a great way to cover an EZB! The solution pulls the mylar to the
outline, It's better than sliced bread!
Ed
-------Original Message-------
From: William Gowen
Date: 4/28/2011 12:03:42 PM
To: Indoor_Construction_at_yahoogroups.com
Subject: Re: [Indoor_Construction] covering with mylar
If you're unsure about any of it just glue 4 sticks together and give it a
try. Make sure the solution is 10:1 or more so it will wick. Spraying is
easier for some stuff but some people have problems with spraying on really
light structurse like EZB. Kang uses spraying on 300mg EZB's! the problem
with spraying is that you only get one shot at getting it right.
On 4/28/2009 11:58 AM, Ed wrote:
Thanks Bill, U answered all the questions, all I have to do is DO IT!!
Thanks
Ed
-------Original Message-------
From: William Gowen
Date: 4/28/2011 11:54:34 AM
To: Indoor_Construction_at_yahoogroups.com
Subject: Re: [Indoor_Construction] covering with mylar
Normally the first application of the solution will anchor the outline. If
you're worried about it you can dab a little of the solution in a couple of
spots around the perimeter. The outline shouldn't change shape during the
process.
On 4/28/2009 11:36 AM, Ed wrote:
Bill, Thanks for the quick reply. What holds the outline in place while
your applying the solution? And , getting the outline "wet" does it change
shape?
-------Original Message-------
From: William Gowen
Date: 4/28/2011 11:28:08 AM
To: Indoor_Construction_at_yahoogroups.com
Subject: Re: [Indoor_Construction] covering with mylar
Ed
I like to let it sit for at least an hour before I start cutting the film.
Overnight is even better. It's one of those things where it's real painful
if you mess up.
On 4/28/2009 11:15 AM, Ed wrote:
Bill, for some reason the Indoor Construction site is not working & I have a
question on your version. When u apply the "solution" to the outline that is
setting on top of the mylar how long does it take to cure or dry?
Thanks
Ed
-------Original Message-------
From: Bill Gowen
Date: 4/22/2011 11:08:18 AM
To: Indoor_Construction_at_yahoogroups.com
Subject: Re: [Indoor_Construction] covering with mylar
No problem.
----- Original Message -----
From: Ed
To: Indoor_Construction_at_yahoogroups.com
Sent: Friday, April 22, 2011 11:01 AM
Subject: Re: [Indoor_Construction] covering with mylar
Hi Bill, thanks for the fast reply. I will check-out the file. If I have ANY
QUESTIONS I'd like to get back to u if I may?
Ed
-------Original Message-------
From: Bill Gowen
Date: 4/22/2011 10:52:37 AM
To: Indoor_Construction_at_yahoogroups.com
Subject: Re: [Indoor_Construction] covering with mylar
Covering with Mylar is very easy. There are a lot of different ways to do it
The video you saw is my version of the technique described by F1Diddler in
the files section of this group.
----- Original Message -----
From: Edward
To: Indoor_Construction_at_yahoogroups.com
Sent: Friday, April 22, 2011 10:42 AM
Subject: [Indoor_Construction] covering with mylar
This is one of the toughest parts of indoor, covering. I was at a web site
where someone was covering with mylar & was using 3M77 in a "little" plastic
container mixing it with a solvent and putting it on a stab. with a brush,
then it was over! It said this process was on Indoor Construction but I
cannot find it. These guys with the F1Ds that look like they were covered
with moulded Mylar must be able to leap tall buildings in a single bound!
Help.....please.
Ed Berton
Brevard, NC
- application/x-ygp-stripped attachment: stored
- application/x-ygp-stripped attachment: stored
Received on Thu Apr 28 2011 - 16:19:37 CEST