Bill
They all differ but basically the F1D jigs which are the largest are 250mm long x 90mm wide 28"-35" helical standard and with some remodelling I can produce specials with wash outs etc. The usual width for the F1D jigs is 70-80mm but the wider offers easier forming for asymetric outlines. I am starting to use obeche which I understand Joe Maxwell used a few years back now which looks very stable.
M'
--- In Indoor_Construction_at_yahoogroups.com, "Bill Gowen" <wdgowen@...> wrote:
>
> Mark
> Do you have any more info available on the prop jigs?
>
> ----- Original Message -----
> From: markbenns
> To: Indoor_Construction_at_yahoogroups.com
> Sent: Wednesday, March 16, 2011 2:43 PM
> Subject: [Indoor_Construction] Re: Winders
>
>
>
> Hi Phedon
>
> Ditto if your still taking orders I would like a 10:1 with rachet $75 is cool with me.
> If you fancy some obeche CNC F1L or F1D machined prop jigs I am about to start machining this weekend ? Standard pitches available any others to order.
>
> Mark
>
> --- In Indoor_Construction_at_yahoogroups.com, Phedon Tsiknopoulos <phedon21t@> wrote:
> >
> > O.K You are in too. So far the 10 and 20 to one are the most popular. Phedon
> >
> >
> >
> >
> > ________________________________
> > From: dennisatyson <ddtyson_at_>
> > To: Indoor_Construction_at_yahoogroups.com
> > Sent: Mon, March 14, 2011 1:47:38 PM
> > Subject: [Indoor_Construction] Re: Winders
> >
> > Â
> > Dito! I'll take one just like John's.
> >
> > Dennis
> >
> > --- In Indoor_Construction_at_yahoogroups.com, "John Kagan" <john_kagan@> wrote:
> > >
> > > I'll take a $75 20:1 (with ratchet)
> > >
> > > > --- In Indoor_Construction_at_yahoogroups.com, Phedon Tsiknopoulos <phedon21t@>
> > >wrote:
> > > > >
> > > > > My winders are guaranteed to be the freest running wether steel, brass or
> > >delrin
> > >
> > > > > gears. If some people need just a winder with no gizmos I could lower the
> > >price
> > >
> > > > > to only $60Ã, Ã, any ratio, 10:1, 15:1, 20:1, 25:1, (also 5:1). Ciao,
> > Phedon
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ________________________________
> > > > > From: Mark F1diddler <f1diddler_at_>
> > > > > To: Indoor_Construction_at_yahoogroups.com
> > > > > Sent: Mon, March 14, 2011 10:43:26 AM
> > > > > Subject: [Indoor_Construction] Re: Winders
> > > > >
> > > > > Ã,Â
> > > > >
> > > > >
> > > > > --- In Indoor_Construction_at_yahoogroups.com, Dwight Brown <freepistol@>
> > >wrote:
> > > > > >
> > > > > > Does anyone have one of the nice winders sold by A2Z (the $200 + one) Can
> > >
> > > > > >anyone give a review or direct me to one? It seems like one of those tools
> > >that
> > >
> > > > > >you buy one and pass down to your grand children.
> > > > > >
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Dwight
> > > > >
> > > > > Dwight, I recall when you asked this a few weeks ago that Australian member
> > >THB
> > >
> > > > > also answered he liked his a2z winder. So if you want to spend $225 for a
> > > > > winder, feel free to offer your review right here. BTW, it seems Phedon's
> > > > > forthcoming winders for $75 may be equally worthy of passing on to one's
> > > > > grandchildren, that is, if by then anyone's grandchildren will have a
> > >working
> > >
> > > > > concept of rubber powered indoor free flight.
> > > > >
> > > >
> > >
> >
>
Received on Wed Mar 16 2011 - 12:00:11 CET
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:46 CET