No. You need to read down the appropriate column (4" for LPP) to 18.9 then go to the left to read the angle which is 37 degrees. Put the prop holder in the end of the gage with 3 holes, put the adjustable part in the set of holes that are 4" from the end ones and set the blade angle at that point to 37 degrees.
----- Original Message -----
From: barrysholder
To: Indoor_Construction_at_yahoogroups.com
Sent: Thursday, August 27, 2009 7:28 PM
Subject: [Indoor_Construction] prop pitch
While building my serious LPP "Thrush" on the plans for the prop, it calls for 19" pitch. I am assuming that using my F1D.biz gauge that would be 19 deg. Is that correct?
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.70/2329 - Release Date: 08/27/09 08:11:00
Received on Thu Aug 27 2009 - 16:34:19 CEST
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:45 CET