Re: Building boards

From: Bill Gowen <b.gowen_at_comcast.net>
Date: Thu, 4 Jun 2009 20:27:38 -0400

When I got my glass I priced 1/4" and 1/2". The 1/4" was about $13 and the 1/2" was about $50 so I went with 1/4".

  ----- Original Message -----
  From: Benjamin Saks
  To: Indoor_Construction_at_yahoogroups.com
  Sent: Thursday, June 04, 2009 8:19 PM
  Subject: Re: [Indoor_Construction] Building boards





  I like using a large piece of plate glass that is 1/2 inch thick. It
  is flat (within reason) and glue will not stick to it. I print out the
  outline of the model and place it under the glass as a refrence. I
  measure all my pieces prior to assembly so the print is for refrence
  only.

  On 6/4/09, barrysholder <barry_at_signandart.com> wrote:
> With all this talk about indoor and so forth I am inspired to build some
> duration models again.
> My question, what are the experience flyers using as building boards?
>
>

  --
  Sent from my mobile device

  BEN SAKS
  Project Designer
  bsaks_at_wetdesign.com

  WET
  10817 Sherman Way
  Sun Valley, CA 91352
  T 818.769.6200
  F 818.301.6111
  www.wetdesign.com


  
Received on Thu Jun 04 2009 - 17:27:50 CEST