--- In Indoor_Construction_at_yahoogroups.com, "Erich Reinbolz"
<erich44_at_...> wrote:
>
> Mark, what I was trying to say, obviously not very well, is: if you
> spray a fuselage like this, the spray would get everywhere, on the
> inside of the framework as well as the outside. I just assumed this
> would not be a good thing. However I like the idea of brushing the 3m
> 77 on. What is it you dilute the 3m with? The can says to clean with
> turpentine. Is that what you use? Sprayed some 77 in a plastic cup
> awhile ago, then brushed onto a test piece, stuck on some tissue,
> seemed to work.
I use in xylene to dillute the 3m77, as advised by someone on the old
indoor group. I don't know the exact dillution, but you can dillute it
too much, it won't adhere very well if too dilute.
Just like covering flying surfaces, place the film into a frame and
place the part to be covered on the film. Place a drop of dilute glue
on the outside of the part right where the part touches the film. You
will see the glue spread out along the frame. Place another drop so
that the spreading glue just overlaps the place where the previous
glue spread. Continue around the part. Let things dry and then cut the
film away, I use a battery powered soldering iron to do this.
I find that this is easy to do and doesn't add much weight in the process.
Marty Sasaki
Received on Sat Mar 22 2008 - 14:37:46 CET
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:45 CET