[indoor_costruction] Re: FAI Steering/Editorial

From: Slobodan <slomi_at_EUnet.yu>
Date: Sun, 16 Sep 2007 20:56:39 +0200

>1a. Re: FAI Steering//Editorial
>Posted by: "Akihiro Danjo" adanjo-373_at_mx1.ttcn.ne.jp akihirodanjo
>Sat Sep 15, 2007 8:37 am (PST)


>I agree with you, Hack san. ....
 

Some explanations:

Balcony in Belgrade in hall 3, where was last ECh, is about 4,5 m high, 12m wide and is along full hall at one side, with normal scale at both ends. That is not a catwalk ...

Last 5 years at all WC's, and EC's it was normal to check motor weights after official flight ... not washed, than moped ... and if you have 2 better rounds new checking of motor weight is not need ... That is intelligible: if you have to heavy rings your motor is heavier than 0.6g, than after official flyte judge you can cut the rings (or rubber), map the dust from rubber after landing, and repeat the checking only the rubber ... Rings and dust can't help you in flite duration of your model. Weight in Belgrade was measured with very precise scale with resolution of 1 mg. If your rubber is 601 mg or more, you get zero.

Regards,

Slobodan Midic

[Non-text portions of this message have been removed]
Received on Sun Sep 16 2007 - 11:58:15 CEST