PLP Premium urethane adhesive, available in caulk tubes and small tubes
at Home Depot, works well too. Cheaper than Goop if you buy the caulk
tube. Moisture cures it, so cover the open end with foil ...Takes
overnight to dry- this is the choice of bottle rocket builders to stick
fins in PET pop bottles. A bit of roughening of the plastic is always
good...
Fred Tellier wrote:
>
>
> I used a product called GOOP there are several types of goop (Shoe,
> plumbers, home etc ), it is a clear silicon type of product, very
> rubbery when cured. I roughed up the area where the foam blocks were to
> be glued and gooped them in. I haven't had any fall off after several years.
Received on Mon Jan 29 2007 - 06:36:56 CET
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:44 CET