Re: LittleSquare - 2007 Wright Stuff model

From: Nick Ray <lasray_at_gmail.com>
Date: Thu, 28 Sep 2006 08:02:19 -0400

You may have to cover the next one with Ezb prop wood to get it up to weight
:-P
Nick

On 9/27/06, Bill Gowen <b.gowen_at_earthlink.net> wrote:
>
> I posted a picture of LittleSquare #1 tonight. I almost didn't have it
> to take a picture. I put on a 2 gram motor and put in 800 turns. I let
> it go in the cul-de-sac thinking that would be a good way to trim out
> the cruise. Well the cruise was fine but it did it 30' up in the air.
> Fortunately the drift was going down the street so when it came down
> (dead stick about 2 minutes later)it didn't hang in a tree or on
> someone's roof!
>
> This model flies great!
>
> I tried to build it per my plans. My prop and my motor stick came out
> a lot lighter than the plan weights. The heaviest piece of wood I
> could find for a motor stick was 6 PCF. I increased the size of the
> motorstick to 1/4" x 3/8" and it still came out under 2 grams. The
> motorstick is huge! I also increased the size of the tailboom. The
> whole model less ballast and rubber weighs 5 grams. The 2 grams of
> ballast is put on as far forward as possible per the design run. The
> CG is about 1/4" behind the wing which is close to the design number
> of 1/8".
>
> Bill Gowen
> Decatur, GA USA
>
>
>


[Non-text portions of this message have been removed]
Received on Thu Sep 28 2006 - 05:16:21 CEST