I'm sure it's not the glue- These blades have just come off the block.
I haven't attached them to the spars yet.
Nicholas
--- In Indoor_Construction_at_yahoogroups.com, "Steve Brown" <rtxc@...>
wrote:
>
>
>
>
> --- In Indoor_Construction_at_yahoogroups.com, "Nicholas"
> <ndhuang83706_at_> wrote:
> >
> > Hi All,
> > I recently made a couple of props for my LPP, but when they finished
> > drying they were warped...
>
> Are you sure this isn't caused by glue shrinkage along the joint where
> the blade and spar meet? If you use much glue in this area you will
> get distortion of the spar and also may get excessive (and increasing)
> camber pulled into the "airfoil" of the blade.
>
> Try gluing the blades on with diluted white or aliphatic glue.
>
Received on Fri Jun 30 2006 - 13:59:07 CEST
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:44 CET