Re: Re: Balsa Strippers

From: Marty Sasaki <marty_at_mss.tzo.com>
Date: Thu, 18 May 2006 16:10:35 -0400

If you set the blade at exactly the right height, you won't have
problems with it cutting into the base. I've made lots of cuts and
there aren't any visible cuts in the base and I've never had prblems
with the blade wandering due to the grain on the base.

     Marty Sasaki
Received on Thu May 18 2006 - 13:16:17 CEST