Gary
It's back to the drawing board for the A-6. Best quarter motor flight on a 3/02 motor of about .26g was 1:15 and altitude gain of about 15'. The model clearly needs an abnormal amount of power. Also, I need to figure out how to get a suitable prop run. Nothing I've tried so far will give me more than about 2 minutes on a quarter motor. You guys must have some dark secrets!
Bill Gowen
Decatur, GA USA
----- Original Message -----
From: Warthodson_at_aol.com
To: Indoor_Construction_at_yahoogroups.com
Sent: Monday, March 20, 2006 9:59 AM
Subject: Re: [Indoor_Construction] A-6 design variables
Bill,
I have standardized on a 4.5" long 1/4 motor. They can be tough to get to
fully unwind without knots stopping the prop. Mine typically weigh about .23 gram.
Gary
In a message dated 3/19/2006 4:10:40 PM Central Standard Time,
wdgowen_at_earthlink.net writes:
That gives me a great opportunity to ask you about a good size for a quarter
motor!
[Non-text portions of this message have been removed]
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "Indoor_Construction" on the web.
b.. To unsubscribe from this group, send an email to:
Indoor_Construction-unsubscribe_at_yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
[Non-text portions of this message have been removed]
Received on Tue Mar 21 2006 - 07:34:22 CET
This archive was generated by Yannick on Sat Dec 14 2019 - 19:13:44 CET